(Armco) Crash Barriers

Bollardtech ‘untensioned’ safety barrier rail provides an economic, robust, durable and flexible general barrier system. Suitable for most car parks, industrial estates, garage forecourts, industrial warehouses and embankments for general delineation applications, protecting plant, machinery, buildings and people on industrial sites.

Manufactured in mild steel all barrier beams and posts are ‘hot dipped’ galvanised to BS EN ISO 1461 (1991) as standard. Components can be delivered direct to site and assembled to suit each sites own specific requirements.

Each individual barrier beam provides an effective length of 3200 mm in length, allowing for an overlap of 300 mm, (3500 mm overall). Each individual overlap point requiring a total of 8 no. M16 type connection bolts. The 310 mm wide corrugated beam derives its strength from its pressed wave profile.

The system can be supplied with two basic types of support posts, either base plate fix or ‘build in’ versions. Both these post formats are available in either ‘RSJ’ or ‘Z’ section. Support posts can be set at either 1600mm or 3200mm centres, depending upon the required loading requirement. Where runs meet at right angles either an internal or an external corner connector piece can be supplied. Whilst convex and curved barrier beams mean different radius on site can be accommodated. These can be bent to specified radius to order. Barrier rail runs are usually terminated with ‘fishtail’ end terminals.

For more information about any of the products featured on this page contact our sales department.

Example of crash barrier

Fishtail end to crash barrier

Crash barrier joint

Example of crash barrier # 2

Barrier rail product diagrams

Armco Spec